Spraying Booth Coating Line Electrostatic Powder Spray Machine THD002

The spray equipment uses an automatic current feedback circuit and adds a pulse control circuit. The gas control part adopts two-stage gas source filtration, voltage regulation and air pressure adjustment, all designed as preset adjustments. The powder output is more uniform, the atomization is better, and the dead angle is much better.

Use the digital panel forwarding key. It can change the pulse and normal function, and voltage current display function. With a very high powdering rate and the best coating quality.

Characteristics of Electrostatic Powder Coating

1. The workpiece can be painted at room temperature

2. High powder utilization rate, up to 95%

3. The coating film is thin and uniform, smooth and without sag

4. On the sharp edges and rough surface of the workpiece, a continuous and smooth coating can be formed.

5. Easy to realize industrialized line production

6. It is more environmentally friendly than spray-paint, but the fireproof and explosion-proof grades are slightly lower.

7. The social and economic benefits are significant, the cost is 20~30% lower than the solvent process, and the batch production cycle is shortened by 20 days.